Aussie Traveller Black Medium Anti Flap Kit (AFK), 2200-2300mm

Aussie Traveller AFK Pole Support Bracket

Quickly and easily attach poles to your Anti-Flap Kit with our squeeze and slide stainless steel bracket.
Simply squeeze the bracket and slide it into the existing track on the AFK. Extend the pole and slot the spigot tip into the hole on the bottom of the bracket to keep your pole exactly where you need it in your annexe.

Aussie Traveller Maxi Curved Roof Rafter (CRR)

Made to the exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling. The CRR is particularly effective when used in conjunction with our Anti-Flap Kit (AFK). Fitting bracklets included. 

The Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree & our own Sunburst & Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap. 

Maxi curve rafter (123-125mm) is suitable for longer awnings on motorhomes or full height caravans. 

Aussie Traveller Curved Tension Roof Rafter (CRR)

Made to the exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling. The CRR is particularly effective when used in conjunction with our Anti-Flap Kit (AFK). Fitting bracklets included. 

The Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree & our own Sunburst & Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap. 

The Curved Tension Rafter is a standard Curved Roof Rafter with a tension arm fitted and is ideally suited to awnings 18' and over.  The lever action of the rafter allows it to exert pressure and help prevent longer awning roller tubes from bowing.

Aussie Traveller Black Mini Curved Roof Rafter (CRR)

Made to the exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling. The CRR is particularly effective when used in conjunction with our Anti-Flap Kit (AFK). Fitting bracklets included. 

The Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree & our own Sunburst & Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap. 

Mini curve rafter (95-98mm) is suitable for awnings of all lengths on pop-top caravans as well as for shorter awnings on motorhomes and full height caravans.   

Aussie Traveller Black Travelling Support Cradle

ATRV's awning support receives the roller and gently supports the weight and natural sag in the middle of the roller.  As you unroll your awning the cradle pivots away from the fabric, ready to accept the roller again when retracting.

Features:

• High pressure die cast components maximises strength and eliminates sharp edges
• Suitable for use on most brands of rollout awnings with a roller tub
• Available in white or black powdercoat finish

Aussie Traveller Black Center insert for AFK

Replacement centre insert for our Anti-Flap Kits. Approximately 450mm in length.

Aussie Traveller AFK Spigot End

Replacement Spigot End suitable for Anti-Flap Kits. When replacing your Anti-Flap Kit, retain the original screw to use on your replacement.

This product is not suitable for Curved Roof Rafters.

Aussie Traveller AFK & CRR Hook End

Replacement stainless steel Hook End suitable for Anti-Flap Kits and Curved Roof Rafters.

When replacing your Anti-Flap Kit or Curved Roof Rafter Hook End, retain the original screw to use on your replacement.

Aussie Traveller AFK & CRR Mounting Bracket (Single)

Replacement stainless steel mounting bracket suitable for Anti-Flap Kits and Curved Roof Rafters.

Includes 1 bracket and 2 screws. The bracket should be mounted 20mm below the awning fabric to avoid any damage.

Aussie Traveller AFK Cam Handle with spring, washer & nut

Replacement Anti-Flap Kit Cam Handle complete with stainless steel spring, washer and nut.

Aussie Traveller AFK & CRR Outrigger Spigot Bracket

The Outrigger Spigot Bracket attaches an Anti-Flap Kit or Curved Roof Rafter to a cassette awning, such as a Thule or Fiamma awning.

This stainless steel bracket comes pre-drilled to suit the Aussie Traveller AFK or CRR spigot ends. It can be attached to the outrigger/lead rail of your cassette awning using 3M tape or by drilling holes to attach with rivets or screws.

Aussie Traveller 2 X Maxi Curved Roof Rafter (Crr)

Made to the exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling. The CRR is particularly effective when used in conjunction with our Anti-Flap Kit (AFK). Fitting bracklets included. 

The Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree & our own Sunburst & Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap. 

Maxi curve rafter (123-125mm) is suitable for longer awnings on motorhomes or full height caravans. 

Aussie Traveller 2 X Curved Tension Roof Rafter (Crr)

Made to the exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling. The CRR is particularly effective when used in conjunction with our Anti-Flap Kit (AFK). Fitting bracklets included. 

The Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree & our own Sunburst & Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap. 

The Curved Tension Rafter is a standard Curved Roof Rafter with a tension arm fitted and is ideally suited to awnings 18' and over.  The lever action of the rafter allows it to exert pressure and help prevent longer awning roller tubes from bowing.

Aussie Traveller 2 X Black Mini Curved Roof Rafter (Crr)

Made to the exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling. The CRR is particularly effective when used in conjunction with our Anti-Flap Kit (AFK). Fitting bracklets included. 

The Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree & our own Sunburst & Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap. 

Mini curve rafter (95-98mm) is suitable for awnings of all lengths on pop-top caravans as well as for shorter awnings on motorhomes and full height caravans.   

Aussie Traveller Black Center Extensions For AFK

Centre extensions for our Anti-Flap Kit, designed for use on awnings with a longer projection.

Features

• Pair of 300mm centre extensions for the Anti-Flap Kit
• Available in White and Black
• Designed to allow the Anti Flap Kit to be used on cassette awnings with a 2.75m to 3m projection when used in conjunction with the 100mm end extensions
• Easy installation. Attaches to the centre of the Anti-Flap Kit and simple slots over the existing centre extension piece.

Aussie Traveller Black Mini Curved Roof Rafter (CRR) with LED

Bright white LED lighting brightens up your space  while keeping your awning taught and stopping water pooling. Made to the exclusive design curve and shape, the Aussie Traveller Curved Roof Rafter (CRR) helps to prevent wind flap and sagging in the fabric of the awning and assists water run-off in the rain. The curved design of the Curved Roof Rafter protects against damage and marking to the awning fabric.

Featuring bright white 950mm LED lights that are battery operated, the LED Curved Roof Rafter includes a USB battery charger (18650 batteries not included), and all the necessary brackets for installation. There is no wiring or cables required, making it easy to use and install. The Mini Curved Roof Rafters are the standard sizing, suitable for awnings of all widths and differing projections on RVs, Caravans and Pop-tops. With their 95mm radius arch height, the lower radius design also reduces the chance of marking or stretching the vinyl fabric.

The Mini CRR can be used on cassette awnings that project out 2.5m when used in conjunction with an AFK/CRR spigot bracket.

Features:

• Bright white LED lights
• No cables - battery powered
• Includes charger
• Easy to use & install
• Protects awning fabric
• Available in white & black
• Fitting brackets included
• Suitable for most rollout awnings

Specifications:

• Max Extension: 2.5m
• Radius (Arch Height): 95mm

PLEASE NOTE:

• On LED Curved Roof Rafters, the ends are switched to allow for the user to easily reach the on/off button.
• We recommend substituting one of the LED CRRs with a Curved Tension Rafter for longer awning lengths