Carefree 228inch/19FT SILVERFADE WHT Altitude Awning with LED Lightbar. FY2286D00RA

Carefree Altitude WHITE Awning Hardware Set

This awning hardware kit is attached to the awning itself, acting as awning arms that extend and retract with the motor. Their impressive strength and durability allow them to be the primary source of awning support.

Features:

• Supporting arms of the awning are motorised and feature inbuilt shocks for reliability by soaking up the odd bump or two.
• Only suitable for pop-tops and caravans due to their compact height.
• Pitch angle is adjustable with 6 different levels
• Strong enough to support the awning without legs, though extra ground support is recommended for longer stays.

Carefree Altitude BLACK Awning Hardware Set

This awning hardware kit is attached to the awning itself, acting as awning arms that extend and retract with the motor. Their impressive strength and durability allow them to be the primary source of awning support.

Features:

• Supporting arms of the awning are motorised and feature inbuilt shocks for reliability by soaking up the odd bump or two.
• Only suitable for pop-tops and caravans due to their compact height.
• Pitch angle is adjustable with 6 different levels
• Strong enough to support the awning without legs, though extra ground support is recommended for longer stays.

CAREFREE AWNING HD SUPPORT POLE KIT

The new Carefree Altitude HD Support Pole Kit is a purposed-designed support pole kit to suit Carefree’s Altitude Awnings, and other rollout awnings without support legs. Staying in one place for an extended time with an Altitude awning will require them to have some kind of upright support.

The HD Support Pole Kit comes with two connecting heads so it can be used to support awnings with roll bars as well as box awnings. They are designed to fit both Carefree and other branded awnings.

Features:

• Cradle head to support awnings with roll bars
• Stabiliz’r Grip head to allow securing to a box awning
• Poles feature crank knobs to secure the pole to the adjusted height
• Comes with stakes and straps to secure the poles to the ground and awning.
• Designed for quick set up, under 5 minutes!

Specifications:

• Poles extend from 1422mm to 2743mm (max)

Important!

When using this kit with Altitude awnings, or any powered awning, ensure that the awning’s power is switched OFF prior to installation! This prevents any sensors the awning has from activating and causing it to retract. If you need to adjust the awning pitch after set up, loosen the pole’s straps and lower before adjusting.

CAREFREE ALTITUDE BT-12 CARAVAN ELECTRONICS (SWITCH, BT-12 MODULE & FASTNERS)

This optional electronics kit enables Bluetooth™ operation of the Altitude through a compatible smart device. It also includes a Combination switch that allows a Master ON/OFF as well as a one touch EXTEND or RETRACT button. This kit allows you to:

• Open & Close the awning
• Turn the LED light bar On
• Adjust the brightness of your LED light bar
• Position the angle of the LED by bringing in or taking out the Awning
• Adjust the optional motion switches sensitivity to complete override if this is installed

Note: BT-12 Motion Sensor is only compatible with the BT-12 Switch