Enerdrive ePOWER 12V 20A Battery Charger & 1000W Pure Sine Wave Inverter Bundle

Description

Enerdrive ePOWER 12V 20A Battery Charger & 1000W Pure Sine Wave Inverter Bundle

 

Pack Includes:

• Enerdrive ePOWER 20A/12V Smart Charger - Three Output - EN31220
• Enerdrive ePOWER Pure Sine Wave Inverter 1000W / 12 volt with remote - EN1110S

Enerdrive ePOWER 20AMP Battery Charger

The Enerdrive ePOWER 20A Battery Charger is a fully automatic, “set and forget” 12V charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.

As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging.

The Enerdrive ePOWER 12V charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank).

EXPERT TIP: The Enerdrive 30Amp breaker is a common accessory suitable for the Enerdrive EN31220 20A AC to DC 12V charger. Please see the optional accessories above.

20A Battery Charger Features:

• Multistage Charging: Fully automatic multistage 20A battery charger with the ability to charge 3 separate battery banks.
• Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
• Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
• Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
• Smart Charging: The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks.
• Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
• LED Display: Easy to use “set and select” menu along with scrolling charger status.
• Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
• Temperature Sensor: Battery temperature sensor included with 3 meter cable.
• 5 Year Warranty from an Australian company renowned for customer support.

 

Specifications 

• Model: EN31220
• Output Current: 20A
• Charge: 14.2 - 15.5 V 
• Float: 13.4 - 13.8 V 
• Charging Control: Four Stages (Bulk/Absorption/Float/Maintenance)
• Battery Compatability: GEL, AGM, FLOODED, LITHIUM 
• Dimensions: 295mm (L) x 206mm (W) x  86mm (H)
• Weight: 2.4kg 

 

 

Enerdrive ePOWER Pure Sine Wave Inverter 1000W / 12 volt with remote

With ePOWER’s state of the art, easy to use design, this 1000W inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle.

The Enerdrive ePOWER 1000W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge many USB powered devices.

 

Features

• Australian GPO Outlets
• True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
• Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
• Automatic shutdown protects overload, over temperature and low/high battery conditions
• High surge capacity for products that require more power to start (2 x constant)
• High efficiency conversion of battery available power to AC power
• Mounting brackets for permanent installation
• Heavy duty DC battery stud connectors
• Includes 5V USB port
• 325mm(L) x 177(W) x 90(H)