Victron Battery Monitor BMV-712 Smart
Free Shipping

Victron Battery Monitor BMV-712 Smart

Reviews: (2)    | Q & A |    SKU: BAM030712000R Learn More»

$273
$351
In Stock1-2 Days Dispatch

FREE SHIPPING

This item is sent via Express Courier. All freight is fully insured.

Accessories List:

$59

$45

Learn More»

Description

Victron Battery Monitor BMV-712 Smart

With Bluetooth built-in, the BMV Smart battery monitor is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

Specifications:

Supply Voltage Range                                                6,5 - 70 VDC
Current Draw < 1mA
Relay 60V / 1A normally open (function can be inverted)
Operating Range (temp) -40 +50°C (-40 - 120°F)
Battery Capacity 1 - 9999 Ah
Dimensions Front: 63 mm diameter | Front bezel: 69 x 69 mm | Body diameter: 52 mm | Body depth: 31 mm
Temperature Range -20 +50°C
Current ± 0,01A
Voltage ± 0,01V
Amps ± 0,1 Ah (hours)
State of Charge (0-100%) ± 0,1%
Time to go ± 1 min
Accuracy of current measurement ± 0,4%
Accuracy of voltage measurement ± 0,3%
Input Voltage 6,5 - 70 VDC
Installation Flush mount
Safety EN 60335-1
Emission / Immunity EN 55014-1 / EN 55014-2
Battery Automotive ECE R10-4 / EN 50498
NOTE Measure voltage of second battery, temp, or midpoint: Yes | VE.Direct Communication port: Yes
Included Shunt (500A / 50mV), Cable (10 m, 6 core UTP with RJ12 connectors, and cable with fuse for ‘+’ connection)
Manufacturers Warranty 5 Years

 

Features:

  • Battery voltage, current, power, ampere-hours consumed and state of charge
  • Remaining time at the current rate of discharge
  • Programmable visual and audible alarm
  • Programmable relay, to turn off non critical loads or to run a generator when needed
  • 500 Amp quick connect shunt and connection kit
  • Shunt selection capability up to 10.000 Amps
  • VE.Direct communication port
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
  • Wide input voltage range: 6,5 – 70V
  • High current measurement resolution: 10 mA (0,01A)
  • Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings

 

Download the Victron Bluetooth app

Use a smartphone or other Bluetooth enabled device to:

  • Customize settings
  • Monitor all important data on single screen
  • View historical data
  • Update the software when new features become available.

Easy to install

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.

Midpoint voltage monitoring

One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.

Very low current draw from the battery Current consumption

0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days.

Bi-stable alarm relay

Prevents increased current draw in case of an alarm. 

Dometic Harrier Brochures

Dometic Harrier Operation Manual

 

Specifications

SKU BAM030712000R

Brand Victron

GTIN 8719076037798

Product Category Batteries Other

Voltage: ± 0,01V

Dimensions: Front: 63 mm diameter | Front bezel: 69 x 69 mm | Body diameter: 52 mm | Body depth: 31 mm

Amps: ± 0,1 Ah (hours)

Input Voltage: 6.5 - 70 VDC

Temperature Range: -20 +50°C

Operating Temperature Range: -40°C to 50°C

Current Draw: < 1mA


NOTE: see full product specifications & further product info in the section on this page.

Warranty

Warranty Period: 5 Years

Warranty Details: Please CLICK HERE for Warranty Information on this product

Delivery

  • We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
  • Small Items are sent with Australia Post via regular post.
  • Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
  • Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
  • Items are fully insured during the freight process.
  • Unfortunately we cannot deliver to PO Boxes.
  • For further details on our Delivery Process you can visit our Delivery Page HERE.

Reviews

Write a product review

Great value product

17 August 2023

The Victron energy battery monitor is a great no frills product, all the essential information right in front of you.

Victron battery monitor

10 December 2021

Great product, shipped fast and packaged safely. Easy website to navigate and purchase.

Q & A


Do You Have Any Questions?