Enerdrive DIY 40A AC and 40 DC2DC Charging Board - Pre Wired
Free Shipping

Enerdrive DIY 40A AC and 40 DC2DC Charging Board - Pre Wired

Reviews: SKU: K-DIY-BOARD Learn More»


$2,349.00
$2,517.00
In StockPlease note this product is built to order. Build time is approximately 4 weeks.

FREE SHIPPING

Accessories List:

$2,399.00

$179.00

$239.00

$225.00

$291.00

$222.00

$209.00

$189.00

Click '+' to show more accessories
Learn More»

Enerdrive DIY 40A AC and 40A DC2DC Charging Board ( With Battery Option)

The Enerdrive DIY 40A AC and 40A DC2DC Charging Board is perfect for the DIY installer seeking a quality solution at a budget price! 

Included:

Available with or without an accessory box including 3 switches and provision to mount your battery monitor display.

 

Optional Accessories: 

EXPERT TIP: One or two AGM Board Cable Kits are common accessories suitable for the Enerdrive DIY 40A AC and 40A DC2DC Charging Board. Thickness, length and quantity will depend on installation type. Please check cable description for details. All the accessories are available in the Accessory List above as optional extras.

 

Compare all the DIY Installation Kit models below:

 

Items Included

eSYS-C

eSYS-D

eSYS-E

eSYS-F

eSYS-G

eSYS-H

eSYS-I

eSYS-J

K-DIY-Board-01

ePOWER AC 40Amp 230v Charger

*

*

*

*

*

 

 

 

*

ePOWER AC 60Amp 230v Charger

 

 

 

 

 

*

*

*

 

ePOWER DC2DC 40+ Charger (Vehicle/Solar)

*

*

*

*

*

*

*

*

*

Morningstar Tristar PWM-45A Solar Controller

 

 

 

 

 

*

*

*

 

ePRO Plus 500A Battery Monitor

*

 

*

 

 

*

 

*

*

with Remote Display

Simarine Pico LCD WIFI Monitoring Screen

 

*

 

*

*

 

*

 

 

Simarine SC303 300A Main Battery Shunt

 

*

 

*

*

 

*

 

 

Simarine SCQ25T Individual Load/Charge Module

 

*

 

*

*

 

 

 

 

Simarine SCQ50 Individual Load/Charge Module

 

*

 

*

*

 

*

 

 

3 Stud Main Negative Bus Bar

*

*

*

*

*

*

*

*

*

40A Low Battery Cutout

*

*

*

*

*

*

*

*

 

Main System Circuit Breaker 120A

*

*

*

*

*

 

 

 

*

Main System Circuit Breaker 200A

 

 

 

 

 

*

*

*

 

Inverter Circuit Breaker 200A

*

*

*

*

*

*

*

*

*

Solar Input Positive Circuit Breaker 40A

 

*

*

*

*

*

 

*

 

Solar Input Positive Circuit Breaker 60A

 

*

*

*

*

*

*

*

 

ePOWER DC2DC 60A Output Fuse Connection

*

*

*

*

*

*

*

*

*

ePOWER AC Charger 50A Output Fuse Connection

*

*

*

*

*

 

 

 

*

ePOWER AC Charger 70A Output Fuse Connection

 

 

 

 

 

*

*

*

 

1 x 30A Load Output Fuse Connections

 

 

 

 

 

 

*

 

*

2 x 30A Load Output Fuse Connections

 

 

 

*

*

*

 

*

 

50A Load Output Fuse Connection

*

 

 

 

 

 

*

 

 

24hr Critical Load 4 Circuit "Wedge" Fuse Block

 

*

 

*

*

 

 

 

 

24hr Critical Load 8 Circuit "Wedge" Fuse Block

 

 

*

 

 

 

 

 

 

Main 6 Circuit "Wedge" Fuse Block

 

 

 

 

 

*

*

 

*

with Negative Bus and Cover

Main 12 Circuit "Wedge" Fuse Block

 

*

*

 

 

 

 

 

 

with Negative Bus and Cover

ePOWER 2000W AC Transfer Inverter

*

 

 

*

 

 

 

 

 

Battery Restart Switch (Lithium Batteries)

*

*

*

*

*

 

 

 

 

12mm Black Plastic Mounting Board.

*

*

*

*

*

*

*

*

*

Water & Rot Resistance

175A Anderson Plug (Inverter)

 

 

 

 

 

 

 

 

*

50A Anderson Plug (Solar Input)

 

 

 

 

 

 

 

 

*

50A Anderson Plug (Vehicle Input)

 

 

 

 

 

 

 

 

*

125Ah B-Tec Lithium Battery                 *
200Ah B-Tec Lithium Battery                 *

Dimensions

1185L x 380W x 130Dmm

600L x 490W x 100Dmm

600L x 490W x 100Dmm

1185L x 380W x 130Dmm

790L x 380W x 100Dmm

1195L x 380W x 111Dmm

1195L x 380W x 111Dmm

920L x 380W x 111Dmm

580L x 580W x 100Dmm

Weight

23kg

14kg

14kg

23kg

16kg

17kg

16.5kg

17kg

14kg

(*) Indicates Standard Fitment

 

 

Specifications: 

 


Output Current Rating (Amps)                                                                                         
40.0 Amps

Charger Mode Output Voltage

13.8V - 15.5V (DC Battery Charger) | 14.2 – 15.5 V (AC Battery Charger)

Float

13.0V - 13.8V (DC Battery Charger) | 13.4 – 13.8 V (AC Battery Charger)

Equalize

15.5V (DC Battery Charger) | 16.0 V (AC Battery Charger)

Charging Control

Three Stages (DC Battery Charger) | Four stages (Bulk/Absorption/Float/Maintenance), Two stages (Bulk/Absorption)Constant Power Supply (Program setting), Priority Battery Bank Charging (AC Battery Charger)

DC Output

Single (DC Battery Charger) | Three (1 fully independent, 2 common with diode isolation) (AC Battery Charger)

Selectable Battery Type

Gel, AGM, Flooded, Lithium, Program (DC & AC Battery Charger) (AC Battery Charger)

Standby Current

< 2 mA (AC Battery Charger)

AC Input Voltage

90 to 265 VAC (AC Battery Charger)

AC Input Operating Range

207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max) (AC Battery Charger)

AC Input Frequency Range

47 – 63 Hz (AC Battery Charger)

Power consumption (DC 12V)

700W (Full Load) (AC Battery Charger)

Power Factor Correction

Yes (AC Battery Charger)

Charger Efficiency

> 82% (AC Battery Charger)

Efficiency

95% (DC Battery Charger)

Reverse Polarity

Yes, (with user replaceable fuse/s) (AC Battery Charger)

Over Charge

Yes, unit shutdown (AC Battery Charger)

Over Temperature Protection

Yes, unit de-rated and shutdown (AC Battery Charger)

Cooling

Forced air ventilation (thermo controlled fan) (AC Battery Charger)

Output Short Circuit

Yes, (with user replaceable fuse/s) (AC Battery Charger)

Temperature Setting

Low/ Normal/ High (Battery Temperature Sensor Standard) (DC Battery Charger) | Hot, Normal, Cold (no sensor connected) (AC Battery Charger)

Battery Temp Sensor Port

RJ12 (standard battery temp. sensor supplied) (AC Battery Charger)

LCD Display

Charging status, Battery Voltage, Output Current & Fault Codes (AC Battery Charger)

AC Input Connection

IEC with Supplied 1.2M Power Lead (AC Battery Charger)

DC Output Connection

Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (AC Battery Charger)

DC Output Ground

Single Heavy Duty Common Ground Stud (AC Battery Charger)

Storage Range (temp)

-40° to 70° C (AC Battery Charger)

Operating Range (temp)

-20° to 60° C (AC Battery Charger)

Humidity

5-95%, relative humidity non-condensing (AC Battery Charger)

Ingress Protection

IP32 (Basic drip proof in vertical orientation) (AC Battery Charger)

Dimensions (LxWxH mm)

242 x 172 x 74mm (DC Battery Charger) | 295mm x 206mm x 90mm (AC Battery Charger)

Regulatory Compliance

Complies with AS/NZS 60335.2.29 Including Australian deviations (AC Battery Charger)

NOTE

Please note, if you order the K-DIY-BOARD-01, you will receive the Epor plus monitor display screen as a loose item to be mounted where you choose. You will not however receive the switches. The switches and accessories box is offered in K-DIY-BOARD-01_K-

Manufacturers Warranty

5 Years

 

 

Enerdrive ePOWER 12V 40A DC to DC Battery Charger:
 

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

Features:

  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
  • 40A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included in charger for more accurate battery charging
 
Dometic Harrier Brochures

Dometic Harrier Operation Manual

In Vehicle & Marine Wiring Diagram

Dometic Harrier Product Diagram

Towed Vehicle Wiring Diagram

Dometic Harrier Product Diagram

 

Enerdrive ePOWER 12V 40A Battery Charger:
 

The EN31240 40A battery charger is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank).

 

Features: 

  • Automatic multistage battery charger with the ability to charge 3 separate battery banks.
  • Battery bank one is separate from battery bank two and three.
  • Battery bank one can be programmed with a different charge algorithm over banks two and three.
  • User adjustable current output. 
  • Regulates its output based on the loads connected to your battery banks.
  • Operates on both 110V / 60Hz and 240V / 50Hz.
  • LED display. 
  • Silent mode. 
  • Battery temperature sensor included with 3 meter cable.

 

Dometic Harrier Operation ManualDometic Harrier Brochures

 

Enerdrive ePRO PLUS Battery Monitor:
 

  • Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C)
  • Supports up to three battery banks (12V, 24V and 48V)
  • Very simple ‘Plug and Play’ installation
  • Perfect integration with Enerdrive DC Modular products
     

The ePRO PLUS is the latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products.

This advanced battery monitor not only shows the true state of charge of your battery system. It also offers a large amount of additional features to optimally supervise your battery system and control external equipment. The ePRO PLUS is compatible with lead based and Lithium batteries (LiFePO4).

The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored.

The installation time is minimal, requiring only one supply wire to the intelligent shunt base and a single ‘QuickLink’ cable between the shunt base and the control/display unit (CDU). Additionally, the battery minus cable must be interrupted in order to insert the shunt into the high current circuit. The fused supply wire and the QuickLink cable are both included in the package, avoiding the need for a separate connection kit.

 

Enerdrive Accessories Box with ePro Plus Battery Monitor and Switches, Not Pre-Wired:
 

The Enerdrive Accessories Box comprises of an ePRO Plus Battery Monitor, three switches and the provision to mount your battery monitor display.

If you choose to purchase the board with the accessories box, the accessories box will be included in your package but not mounted and not pre wired. There is a space on the board to mount the accessories box, or you may want to mount it elsewhere in your vehicle.

 

Enerdrive Accessories Box with ePro Plus Battery Monitor and Switches, Not Pre-Wired

 

 

Enerdrive ePOWER B-TEC 125Ah G2 Lithium Battery

The ePOWER B-TEC G2 is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

The Battery now includes a battery strap!

 

Specifications: 

  • Amp Hours (Ah) 125.0
  • Battery Voltage 12V
  • Nominal Voltage 12.8V
  • Nominal Capacity 125Ah
  • Cycle Life (DOD - 80% under controlled conditions) ≥ 2000 Cycles
  • Battery Charge Temperature 0 - 45°C
  • Normal Charge Voltage CV/CC* 14.40 - 14.60V
  • Standby (Float) Voltage 13.50 - 13.80V
  • Maximum Charge Current 60A @ 25°C for 30mins
  • Recommended Charge Current for Maximum Life ≤ 40A
  • Battery Dishcarge Temperature -20 ̴ 60°C
  • Battery Output Voltage Range 11.00 - 14.60V
  • Maximum Dishcarge Current 100A @ 25°C ± 5°C for 30mins
  • Pulse Discharge Current 450A for 1.0s
  • Discharge Cut-off Voltage ≤11.20V
  • Weight 15 kg

 

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

 

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings
Lithium v AGM Capacities;

  • 125Ah Lithium = 200Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

Dometic Harrier Brochures 
Dometic Harrier Operation Manual

 

 

Enerdrive ePOWER B-TEC 200Ah Lithium Battery Only

The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 5 Year full replacement warranty. The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Features: 

  • BMS restart button for easy recovery.
  • RS485 communications port for advanced system integration. 
  • Raised terminals for 360 degree cable connections.
  • Re-designed battery case for easy serviceability. 
  • Battery box and straps INCLUDED - nothing more to buy!
  • Product dimensions 505 x 173 x 265 mm

 

Specifications: 

Amp Hours (Ah) 200.0 Ah
Battery Voltage 12V
Float 13.50 - 13.80V
Model EPL-200BT-12V
Nominal Voltage 12.8V
Nominal Capacity 200Ah
Total Charge Current Max 150A @ 25°C for 30mins
Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
Battery Charge Temperature 0 ̴ 45°C
Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V
Standby (Float) Voltage 13.50 ̴ 13.80V
Maximum Charge Current 150A @ 25°C for 30mins
Recommended Charge Current for Maximum Life ≤ 60A
Battery Discharge Temperature -20 ̴ 60°C
Battery Output Voltage Range 11.00 ̴ 14.60V
Maximum Discharge Current 200A @ 25°C ± 5°C for 30mins
Pulse Discharge Current 450A for 1.0s
Discharge Cut-off Voltage ≤ 11.20V
Dimensions 505 x 172.5 x 265 mm (L x W x H)
Net Weight (kg) 25.0 Kg
Manufacturers Warranty                                                                                                                                                             5 Years

 

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

 

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings
Lithium v AGM Capacities;

  • 200Ah Lithium = 360Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

 

Dometic Harrier Operation Manual

Dometic Harrier Brochures

Dometic Harrier Product Diagram

 

SKU K-DIY-BOARD

Brand Enerdrive

Product Category Power Systems

Voltage 12V

Output Current Rating (Amps): 40 Ah

Amp Hours (Ah): 125  (125Ah Battery) | 200 (200Ah Battery)

Dimensions: 242 x 172 x 74mm (DC Battery Charger) | 295mm x 206mm x 90mm (AC Battery Charger) (L x W x H) | 318 x 165 x 215 mm (L x W x H) (125Ah Battery)  | 505 x 172.5 x 265 mm (L x W x H) (200Ah Battery)

Weight: 14kg (Without Accessories Box) | 14.3kg (With Accessories Box) | 15 Kg (125Ah Battery) | 25 Kg (200Ah Battery)


NOTE: see full product specifications & further product info in the Description section on this page.

Warranty Period: 5 Years

Warranty Details: Please CLICK HERE for Warranty Information on this product

  • We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
  • Small Items are sent with Australia Post via regular post.
  • Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
  • Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
  • Items are fully insured during the freight process.
  • Unfortunately we cannot deliver to PO Boxes.
  • For further details on our Delivery Process you can visit our Delivery Page HERE.

Important Covid-19 Comment: during these difficult times, our dispatch and delivery times are longer than normal. Please allow additional days for delivery over and above the normal estimates outlined above.

Write a product review

My experience

By: on 15 January 2022

The actual system works well, excellent battery management on the two AGM's i have in the van. The panel was easy to install, but think about how you are going to reroute the exsisting wireing to hook up to the Enerdrive DIY 40A AC and 40 DC2DC Charging Board - Pre Wired.Lastly this is a well designed and made board .