BMPRO RV View 2 Battery Monitor with OdysseyLink104
SKU: BMPRVVIEW2OD Learn More»
BMPRO RV View 2 Battery Monitor with OdysseyLink104
MONITOR YOUR RV BATTERY WITH A WALL MOUNTED 12V BATTERY MONITOR
The RVView2 is a wall-mounted battery monitor designed specifically to operate with BMPRO’s BatteryPlus35-II. The RVView2 connects to the BatteryPlus35-II via the data cable. The monitor gives you vital up-to-the-minute data about your caravan’s current status using a clear back-lit display. The display shows volts and amps, battery charge and discharge status, as well as the source input for the vehicle’s 12V system.
Input Amps shows the total current going through the BatteryPlus35-II while Output Amps shows the current provided to appliances. Input source indicator displays mains, solar, auxiliary, or two simultaneously present power sources, if available.
System voltage displays the voltage across the battery terminals, while the battery symbol indicates whether the battery is charging, discharging, fully loaded or not fully loaded. As a power saving feature, the display will turn off automatically 30 sec after its activation.
In addition to battery monitoring, the RVView2 enables monitoring of water levels of up to four water tanks from a sleek, wall mounted display.
The RVView2 can be connected to the OdysseyLink to become a part of the Odyssey system. The OdysseyLink enables SmartConnect Bluetooth sensors and the use of a free Odyssey App to remotely monitor the battery and control caravan’s water pumps from the mobile phone.
The RVView2 is designed and manufactured in Australia.
Features:
- Lithium compatible
- Battery voltage & charge status
- Battery charging & discharging currents
- Auxiliary and solar charging currents
- Level indication of up to 4 water tanks
- Battery on/off status
- Separate water tank screen
- Function to disconnect the battery from the load
- Includes OdysseyLink to enable SmartConnect and the Odyssey app
Specifications:
- Input Voltage: 6V-16V
- Monitored Battery Capacity: 50Ah to 600Ah
- Water Tank Monitoring: Dipper or Tank Bungs
- Visual Warning: BatteryPlus35 short-circuit
- Battery Drain: < 22mA
- Ambient Temperature: 0°C – 50°C
- Dimensions: 140 x 80 x 15.5mm
What's Included:
- RVView2 Wall-mounted 12V Battery Monitor
- OdysseyLink104 Communication Centre
- Data Cable
.png)
The table below illustrates the compatibility of the different BMPRO products and if any prerequisites apply to a combination
Please CLICK HERE to view more information
Specifications
SKU BMPRVVIEW2OD
Brand BMPRO
GTIN 09358381000227
Product Category Battery Monitors
Dimensions 140 x 80 x 15.5 mm
Q & A
-
Does this include the odysseylink103?
Hi There,
The RVVIEW does not include the OdysseyLink. It does include the cable to connect to an OdysseyLink however.
Why is the input/output current on my RVView2 showing as 0.0A when there is an active current?The RVView2 can only display input or output figures of 0.5A or higher. If the level of current is lower than 0.5A, the RVView2 will display 0.0A.
My BatteryPlus35 should be charging but there is no charging indicator on the RVView?The charging indicator on the RVView will only appear if the charging current to the battery is 1.0A or higher. If you have BMPRO’s BC300 + CommLink installed, check that it is wired correctly.
Why are four water tanks displaying on my RVView when I don’t have four connected?The RVView will always display four water tanks. If a tank is not connected, it will show a tank with one segment full, the same as if a tank was connected that is either empty or less than one-quarter full.
Reviews
BM PRO RV view 2 battery monitor with odyssey link
By: Suzie on11 August 2023
Fantastic service. Great productBMPRO RV VIEW 2 BATTERY MONITOR WITH ODYSSEYLINK10
By: Brendan Hehir on20 September 2022
Easy to order, easy to install. Very happy with the purchase. Being able to also view the battery monitor system through the app on my mobile phone makes life so much easier. Highly recommend this set up.BMPro RV View 2 with Odysseylink 103
By: Sean on26 March 2022
Interfaces as designed with the BMPro BatteryPlus35-II-HA BMS. This device allows you to change the 35-HA BMS from a lead-acid to a lithium profile and it also allows you to monitor the vitals on the LCD screen. The brilliant part is that it allows you to utilise the BMPro Odyssey iPhone and/Android app on your phone or tablet which allows you to view and change so much functionality too long to list here.Warranty
Warranty Period: 2 Years
Warranty Details: Please CLICK HERE for Warranty Information on this product
Delivery
- We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
- Small Items are sent with Australia Post via regular post.
- Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
- Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
- Items are fully insured during the freight process.
- Unfortunately we cannot deliver to PO Boxes.
- For further details on our Delivery Process you can visit our Delivery Page HERE.
